When the mortar joint of your brick or block chimney, wall, or any structure is already old and damaged, then you have to fix it using tuckpointing tools.

What is Tuckpointing?

Tuckpointing is the process of removing old damaged mortar and replacing new mortar in between bricks, stones, blocks, or other masonry surfaces.

As a bricked chimney or wall ages, the mortar will become weak and brittle. While the damaged parts can be fixed with a sealant, over time, a major repairing of it will be necessary.

When Should You Tuckpoint?

The original brick or stone and mortar building framework can last for as long as 50 years. Especially when proper maintenance of masonry sealer and spot tuckpointing has been taken during the brickworks lifespan.

After some years, the mortar can become brittle and may not hold proper support of the brick structure. This will affect its durability, so tuckpointing has to be performed.

When repairing your brick or block structure, you have to use the proper tools to fix the formation.

What Are the Different Tuckpointing Tools?

When repairing your wall or chimney, it is important that you have all the necessary tuckpointing tools and equipment to do it. Below is a list of the tools that you need to tuckpoint your brick or stone and mortar structure.

1. Mortar Trowel

Trowels are used to spread the mortar when tuckpointing and repointing the block, stone, or brick. Mortar trowels come in a variety of sizes. So when choosing a trowel to use, select the one that is just wide enough for spreading the mortar properly. Thin trowels can delay your work as spreading will be taking more time. Wide trowels, on the other hand, make your tuckpointing messy as mortar can spread beyond the width of your bricks. For easier control and a cleaner result, use just the right trowel width.

2. Tuckpointing Grinder

Grinders are one of the most essential tools for tuckpointing and repointing. They are used to remove mortar joints and cut bricks, stones, or blocks.

3. Plugging Chisel and Hammer

The plugging chisel or also called mortar chisel and hammer are used to clean the old mortar joints that need replacement. Use a plugging chisel that is not too big nor too small so you can control it more easily with the hammer as you crack the mortar.

4. Mortar Gun

The mortar gun is used to speed up the application of mortar into the brick for crack mortar repairs.

5. Masonry Brushes

Masonry brushes are used to clean off the repair area or for finishing touches. These aid in removing dust particles after fixing the framework.

If you do masonry work, it is highly important that you have the necessary tools for tuckpointing and repointing. It is also vital that you choose the best quality repointing and tuckpointing tools to fix brick and mortar panels.

As somebody who’s primary work lies in masonry, investing for quality tuckpointing tools is a great step that will help you do your job efficiently. In the long run, saves you more money as you don’t have to continually buy new equipment. So get the best quality, highly durable tools for tuckpointing and repointing.